FEATURED SOLUTION
LINETRAXX® SmartDetect RCMS
Four-channel residual current monitoring for earthed AC, AC/DC and DC systems.
Industries / Data centres
BENDER DISTRIBUTOR IN TÜRKİYE · ADEO TEKNİK
Residual Current and Rack Monitoring in Data Centres
Greater visibility against interruptions.
BENDER SECTOR INTRODUCTION · BRIEF SUMMARY
Data centres · Bender solutions.
Bender’s data centre introduction treats servers, air conditioning, power distribution and cabling as parts of the same availability chain. Although UPS systems and alternative sources are important, developing electrical faults in distribution circuits must also be visible.
Bender distributor in Türkiye · ADEO Teknik
Sector brochure
Safety and availability in data centres
RCMS and EDGE500 solutions for data centres
Start with models selected for the application’s measurement and monitoring duties; other products and accessories appear in the complete list below.
Compare all related products ↓ · Product selection and quotations from the distributor ↗
RCMS measures; EDGE500 brings information together.
Measuring points and central monitoring fulfil different roles in showing electrical conditions in distribution, rack and cooling supplies. RCMS evaluates residual currents; COMTRAXX® EDGE500IP brings measurements and alarms from compatible devices into a shared view.
LINETRAXX® SmartDetect RCMS
Evaluates values from suitable measuring current transformers on four channels. Prewarning and main alarm thresholds can be set for each channel; AC, pulsating DC and smooth DC detection depend on the selected configuration and function modules.
- Monitoring the relevant distribution branch or load group at a separate measuring point
- Evaluating measured values and channel alarms on the local display
- Transmitting measurements and alarms via Modbus RTU
COMTRAXX® EDGE500IP
Collects measurements, status and alarm messages from compatible devices. Provides browser-based installation views, alarm assessment and recording; it does not replace the device that directly measures residual current.
- Viewing different measuring points through a shared web interface
- Linking alarms to the relevant device and measuring point
- Providing data to building management and supervisory systems through supported interfaces
MEASURING POINTCompatible current transformers
Measurement information from the relevant distribution circuit
Sensor options ↗EVALUATIONRCMS
Channel measurements, prewarning and main alarm
CENTRAL VIEWEDGE500IP
Web visualisation, alarm management and supervisory system connection
The diagram shows the functional information flow. Sensor compatibility, detection type, communication protocol and software function modules depend on the selected devices. Continuous monitoring and protective tripping duties are defined separately.
Bender manufacturer sources: SmartDetect RCMS · COMTRAXX EDGE500IP · Condition Monitoring in data centres · PDF p. 12
BENDER’S SECTOR APPROACH
Complement redundant supplies with continuous electrical status information.
Bender’s data centre introduction treats servers, air conditioning, power distribution and cabling as parts of the same availability chain. Although UPS systems and alternative sources are important, developing electrical faults in distribution circuits must also be visible. Residual current data, alarm management and long-term monitoring underpin this approach.
See the whole supply chain
A problem in a cooling or distribution component can also affect IT loads. Assess infrastructure supplies alongside racks when defining the monitoring scope.
Explore the brochure · PDF p. 5 ↗Follow critical changes
Continuous residual current monitoring supports early recognition of changes in circuit condition and assessment by measuring point.
Explore the brochure · PDF p. 10 ↗Bring measurements to the operations screen
Sensor and evaluation unit data can be viewed through EDGE500, CP907-I or supervisory software. Local visualisation and building management connectivity are considered together.
Explore the brochure · PDF p. 12 ↗FROM APPLICATION TO PRODUCT SELECTION
Assess measurements, diagnostics and status information together.
Define the circuit’s system arrangement, operating conditions and information needs, then explore the Bender product families and model details below.
Explore models for this sector ↓
BENDER SECTOR PUBLICATIONS · ADEO TEKNİK
Explore the sector through Bender publications.
BENDER SECTOR PUBLICATION
Safety and availability in data centres
Official Bender manufacturer publication
Open brochure PDF ↗Download PDF ↓Bender source document ↗
ADEO PRESENTATION ARCHIVE
Safety and availability in data centres
Presentation file from the previous ADEO website · original link retained
Open brochure PDF ↗Download PDF ↓Other related Bender publications · 4 documents
BENDER SECTOR PUBLICATIONUS / North American edition
Industrial applications · Bender solutions guide
Original publication: Bender Industry Applications
Bender manufacturer publication · US / North American edition
Open brochure PDF ↗Download PDF ↓Bender source document ↗
BENDER SECTOR PUBLICATION
Central earthing point · CEP
Original publication: CEP - Central earthing Point
Sector publication from Bender’s official download centre
Open brochure PDF ↗Download PDF ↓Bender source document ↗
BENDER SECTOR PUBLICATION
Flexible system communication and central monitoring
Original publication: Flexible system communication
Sector publication from Bender’s official download centre
Open brochure PDF ↗Download PDF ↓Bender source document ↗
BENDER SECTOR PUBLICATION
Resilient distribution in data centres · RCMB300 application
Original publication: SensorPRO LINETRAXX® RCMB300 series - The design of resilient data centres
Sector publication from Bender’s official download centre
Open brochure PDF ↗Download PDF ↓Bender source document ↗As Bender’s distributor in Türkiye, ADEO Teknik provides product and accessory selection support, technical documentation and supply information for the solutions described in these sources.
EXPLORE THE SECTOR
One sector, different applications.
Explore applications, Bender product families and technical resources on the application detail pages.
APPLICATION DETAILS
Air conditioning
Explore the application ↗APPLICATION DETAILSControl room
Explore the application ↗APPLICATION DETAILSPower supply
Explore the application ↗APPLICATION DETAILSServer and rack monitoring
Explore the application ↗APPLICATION DETAILSOperation and service
Explore the application ↗APPLICATION → BENDER APPROACH
Which solution, where?
Identify the monitoring need and explore the relevant product family’s technical scope.
01 / APPLICATION
Main and sub-distribution
Following changes in residual currents in earthed circuits.
THE BENDER APPROACH
RCM / RCMS and compatible measuring current transformers.
Related product family ↗VISIBILITY PROVIDED
Residual current and alarm information by circuit or channel.
02 / APPLICATION
Energy and power quality
Viewing voltage, current, power, energy and harmonic indicators.
VISIBILITY PROVIDED
Measurement data on supply quality and energy use.
03 / APPLICATION
Control room and supervisory systems
Assessing distributed device status at one point.
VISIBILITY PROVIDED
Central access to alarms and measurements from compatible devices.
Sector approach source: Official Bender sector information ↗. The exact model and variant are selected according to the application’s technical requirements.
RELATED PRODUCT GROUPS FOR THIS SECTOR
From needs to the right technology.
As Bender’s distributor in Türkiye, ADEO Teknik provides product selection, technical information and supply support.
BENDER PRODUCT FAMILYResidual current monitoring
Single- and multichannel RCM / RCMS monitoring products for earthed circuits.
Explore the family ↗
BENDER PRODUCT FAMILYMeasuring current transformers
Measuring current transformer options compatible with RCM, RCMS and EDS products.
Explore the family ↗
BENDER PRODUCT FAMILYPower quality and energy metering
Tracking electrical quantities, energy consumption and power quality indicators.
Explore the family ↗
BENDER PRODUCT FAMILYCommunication and central monitoring
Products that combine measurement and alarm data from compatible devices.
Explore the family ↗System topology, operating conditions and approval requirements are considered together when selecting products and variants.
BENDER DISTRIBUTOR IN TÜRKİYE
Access Bender technology
through ADEO Teknik.
Data centres · explore product families, manufacturer technical information and supply options.
Get information and a quotation for your sector ↗- 01Product family and model informationProduct scope appropriate to the monitored quantity and system arrangement.
- 02Manufacturer technical sourcesData sheets, variant information and relevant operating manuals.
- 03Quotation and product supplyDistributor support for product codes, accessories, quantities and supply requests.
BENDER DISTRIBUTOR IN TÜRKİYE · PRODUCT SELECTION BY SECTOR
Bender models for your sector.
Compare related products with images and access technical details, model options and manufacturer documentation. Assess the technology required by your application alongside suitable accessories.
Distribution and PDU residual current monitoring
Different measuring points from the main switchboard to rack/PDU level.
Residual current monitoring
LINETRAXX® SmartDetect RCMS
Four-channel residual current monitoring for earthed AC, AC/DC and DC systems.
Data centre air conditioning ↗
Residual current monitoring
LINETRAXX® RCMS460-D
Residual current monitor with 12 channels and a local graphic display, supporting multi-device monitoring via BMS.
Data centre air conditioning ↗
Residual current monitoring
LINETRAXX® RCMS490-L
RCMS variant with LED indication and a separate alarm contact for each of its 12 measurement channels.
Data centre air conditioning ↗
Residual current monitoring
LINETRAXX® RCMB330
Module providing AC/DC residual current monitoring with an integrated split-core measuring current transformer and Modbus RTU.
Residual current monitoring
RCMB130 series
Compact module family with Modbus or PWM output for AC/DC residual current measurement in PDUs and socket boxes.
Residual current monitoring
LINETRAXX® CEP410R-2
Type A monitoring device for identifying unwanted PEN bridges and neutral connections at the central earthing point.
Measuring current transformers and energy data
AC/DC sensitivity is selected according to the transformer–evaluator combination.
Measuring current transformers
LINETRAXX® CTBS25
AC/DC-sensitive measuring current transformer installable without disconnecting primary conductors.
Measuring current transformers
LINETRAXX® CTAS series
Split-core transformer series for RCM/RCMS and EDS systems, suitable for retrofitting to existing circuits.
Power quality and energy metering
LINETRAXX® PEM353
Voltage, current, power and energy measurement; THD and harmonic indicators up to the 31st order.
Data centre air conditioning ↗Central visibility
Bring compatible device data to the operating screen.
Communication and central monitoring
COMTRAXX® EDGE500IP
Condition monitor with an integrated gateway.
Data centre air conditioning ↗
Communication and central monitoring
COMTRAXX® RCP115
15.6-inch touch remote-control panel with processor for access to web-based technical views.
Communication and central monitoring
POWERSCOUT®
Monitoring software combining electrical distribution data, events and long-term trends in web-based dashboards.
Data centre air conditioning ↗Other relevant models from the complete portfolio
Product options for other applications in this sector. Follow the application links on the cards to explore their scope.
Communication and central monitoring
COMTRAXX® COM465IP
Condition monitor with an integrated gateway for connecting Bender devices to Ethernet-TCP/IP networks.
Data centre air conditioning ↗Communication and central monitoring
COMTRAXX® CP907-I
Condition monitor with a display and an integrated gateway.
Data centre air conditioning ↗
Measuring current transformers
LINETRAXX® CTUB100 series
AC/DC-sensitive measuring current transformer series comprising a CTBC core and electronic module.
Data centre air conditioning ↗
Residual current monitoring
LINETRAXX® RCMS460-L
RCMS460 variant with channel alarm LEDs and BMS address indication for 12-channel systems.
Data centre air conditioning ↗
Residual current monitoring
LINETRAXX® RCMS490-D
Monitoring device offering 12-channel residual current monitoring with the appropriate measuring current transformers.
Data centre air conditioning ↗
Insulation monitoring · IMD
ISOMETER® IR425-D4
Insulation monitoring device for 0…300 V AC/DC IT control circuits containing DC components.
Data centre power supplies ↗
Insulation monitoring · IMD
ISOMETER® iso685…
Insulation monitoring for inverter applications and large industrial installations.
Data centre power supplies ↗
System components and accessories
AGH150…
Coupling component extending the nominal voltage range of compatible ISOMETER® devices.
Data centre power supplies ↗
System components and accessories
AGH204S-4
Coupling device extending the voltage range of compatible ISOMETER devices in three-phase IT systems.
Data centre power supplies ↗
System components and accessories
AGH520S
Coupling device for connecting compatible ISOMETER models to AC systems up to 7.2 kV.
Data centre power supplies ↗
System components and accessories
AGH676S-4
Component extending the voltage range to 12 kV in AC IT systems with compatible ISOMETER devices.
Data centre power supplies ↗
Insulation fault location
ISOSCAN® EDS30…
Portable insulation fault location in IT systems, with a separate residual current measurement function for TN/TT systems.
Test and diagnostic products for data centres ↗
Electrical safety testers
UNIMET® 810ST
Test system for medical electrical equipment safety tests and record management.
Test and diagnostic products for data centres ↗OTHER OPTIONS IN THE PRODUCT FAMILY
Let’s select the variant for your needs.
Explore all options in the relevant family. Assess model selection alongside system topology, voltage, measurement requirements and accessory compatibility.
Residual current monitoringCompare 18 products / series in this family ↗Measuring current transformersCompare 10 products / series in this family ↗Power quality and energy meteringCompare 2 products / series in this family ↗
Communication and central monitoringCompare 8 products / series in this family ↗Insulation monitoring · IMDCompare 30 products / series in this family ↗
System components and accessoriesCompare 21 products / series in this family ↗
Insulation fault locationCompare 5 products / series in this family ↗
Electrical safety testersCompare 4 products / series in this family ↗Contact your distributor in Türkiye for Bender products.
As Bender’s distributor in Türkiye, ADEO Teknik provides technical product information and quotation support for model and accessory selection, manufacturer documentation and product supply.
TECHNICAL SOURCES FROM THE MANUFACTURER
Brochures and technical documentation.
Links open Bender’s official PDF files in a new tab. The documents are in English.
GET INFORMATION FROM THE DISTRIBUTOR IN TÜRKİYE
What should you share for product selection?
Share the system type, AC/DC voltage, application and monitoring objective. We can assess your technical information, documentation and quotation request for the relevant Bender product family.
From application to product family
Explore product group introductions and original manufacturer brochures with ADEO Teknik, Bender’s distributor in Türkiye.
Residual current monitoringDetecting sinusoidal AC, pulsating DC and smooth DC components requires different sensor and evaluator configurations. Choose A/F or B/B+ according to the application's current waveform.Read the product group guide ↗Measuring current transformersType A is considered for alternating and pulsating direct currents; suitable Type B sensors are assessed where smooth DC components must also be measured.Read the product group guide ↗
Power quality and energy meteringMain distribution, subdistribution and load levels are monitored according to the installation configuration. Multiple measuring points help assess the source of a change.Read the product group guide ↗
Communication and central monitoringInterfaces such as BMS, BCOM and Modbus are selected according to the product's supported architecture. Do not assume every device supports every protocol.Read the product group guide ↗