Industries / Mechanical and plant engineering / Other mechanical engineering applications
Mechanical and plant engineering · BENDER DISTRIBUTOR IN TÜRKİYE
IMD and Relay Selection for Machine Circuits
BENDER APPLICATION INTRODUCTION · BRIEF SUMMARY
Define the electrical architecture before considering the machine’s function
Bender’s industrial brochure distinguishes the electrical monitoring duties common to different machines: insulation monitoring in IT systems, locating faulty circuits and residual current monitoring in earthed distribution systems. Model selection depends on the machine’s actual circuit arrangement.
Bender distributor in Türkiye · ADEO Teknik
Sector brochure
Industrial applications · Bender solutions guide
Understand the application’s electrical needs.
Electrical monitoring for machine safety is selected according to the machine’s system arrangement and the quantity to be monitored. Technical scope is compared without assuming that the same product suits every machine.
Featured Bender products for this application
Start with models selected for the application’s measurement and monitoring duties; other products and accessories appear in the complete list below.
FEATURED SOLUTION
ISOMETER® IR425-D4
Insulation monitoring device for 0…300 V AC/DC IT control circuits containing DC components.
Compare all related products ↓ · Product selection and quotations from the distributor ↗
FROM THE BENDER BROCHURE · APPLICATION GUIDE
Define the electrical architecture before considering the machine’s function
Bender’s industrial brochure distinguishes the electrical monitoring duties common to different machines: insulation monitoring in IT systems, locating faulty circuits and residual current monitoring in earthed distribution systems. Model selection depends on the machine’s actual circuit arrangement.
Related brochure section · PDF p. 10 ↗
Assess main and auxiliary circuits separately.
IMD, RCM or current relay selection depends on the machine’s main/control circuit and automation interface.
Define monitoring, fault diagnosis and alarm transmission duties.
After choosing a product family for the application, compare the model’s measurement scope, accessory compatibility and communication options on its detail page.
Explore related Bender models ↓The explanation, Bender’s relevant sector publication and official application page form the basis of this content. The image is presented in its original form from the source brochure.
BENDER SECTOR PUBLICATIONS · ADEO TEKNİK
Bender sector brochures for this application.
BENDER SECTOR PUBLICATIONUS / North American edition
Industrial applications · Bender solutions guide
Original publication: Bender Industry Applications
Bender manufacturer publication · US / North American edition
Open brochure PDF ↗Download PDF ↓Bender source document ↗Other related Bender publications · 2 documents
BENDER SECTOR PUBLICATION
Electrical monitoring in beverage and bottling plants
Official Bender manufacturer publication
Open brochure PDF ↗Download PDF ↓Bender source document ↗
BENDER SECTOR PUBLICATION
Flexible system communication and central monitoring
Original publication: Flexible system communication
Sector publication from Bender’s official download centre
Open brochure PDF ↗Download PDF ↓Bender source document ↗BENDER SOLUTION GROUPS
From needs to product family.
Product families fulfil different measurement and notification duties. The model’s full scope and required components are identified in the relevant technical source.
BENDER PRODUCT FAMILYInsulation monitoring · IMD
Application-specific ISOMETER® insulation monitoring devices for IT systems.
Explore related products ↗
BENDER PRODUCT FAMILYResidual current monitoring
Single- and multichannel RCM / RCMS monitoring products for earthed circuits.
Explore related products ↗ADEO TEKNİK · BENDER DISTRIBUTOR IN TÜRKİYE
Let’s define the product
and its technical scope together.
You can request product information, manufacturer documentation and a supply quotation for this application.
Get product information for your application ↗- 01Application and systemApplication area, AC/DC configuration and nominal voltage.
- 02Product and technical documentationModel, variant, communication and compatible component information.
- 03Quotation and supplyDistributor support for product codes, quantities and accessory requests.
BENDER DISTRIBUTOR IN TÜRKİYE · PRODUCT SELECTION BY APPLICATION
Bender models for this application.
IMD, RCM or current relay selection depends on the machine’s main/control circuit and automation interface.
Insulation monitoring · IMD
ISOMETER® iso415R
IMD for unearthed AC, AC/DC and DC main and control circuits.
Insulation monitoring · IMD
ISOMETER® IR425-D4
Insulation monitoring device for 0…300 V AC/DC IT control circuits containing DC components.
Residual current monitoring
LINETRAXX® SmartDetect RCMS
Four-channel residual current monitoring for earthed AC, AC/DC and DC systems.
Measuring and monitoring relays
LINETRAXX® CMD420/CMD421
Relay series monitoring AC undercurrent and overcurrent conditions at three measurement inputs with standard current transformers.
Measuring and monitoring relays
LINETRAXX® VMD421H
Relay monitoring voltage, frequency, phase sequence and asymmetry in three-phase systems, powered from the monitored circuit.
Communication and central monitoring
COMTRAXX® COM465DP
Gateway transferring Bender device measurement, alarm and status data to PROFIBUS DP and Ethernet networks.
Communication and central monitoring
COMTRAXX® CP907-I
Condition monitor with a display and an integrated gateway.
Communication and central monitoring
POWERSCOUT®
Monitoring software combining electrical distribution data, events and long-term trends in web-based dashboards.
Insulation monitoring · IMD
ISOMETER® iso685…
Insulation monitoring for inverter applications and large industrial installations.
Residual current monitoring
LINETRAXX® RCMS460-D
Residual current monitor with 12 channels and a local graphic display, supporting multi-device monitoring via BMS.
Residual current monitoring
LINETRAXX® RCMS460-L
RCMS460 variant with channel alarm LEDs and BMS address indication for 12-channel systems.
Residual current monitoring
LINETRAXX® RCMS490-D
Monitoring device offering 12-channel residual current monitoring with the appropriate measuring current transformers.
Residual current monitoring
LINETRAXX® RCMS490-L
RCMS variant with LED indication and a separate alarm contact for each of its 12 measurement channels.
OTHER OPTIONS IN THE PRODUCT FAMILY
Let’s select the variant for your needs.
Explore all options in the relevant family. Assess model selection alongside system topology, voltage, measurement requirements and accessory compatibility.
Insulation monitoring · IMDCompare 30 products / series in this family ↗Residual current monitoringCompare 18 products / series in this family ↗
Measuring and monitoring relaysCompare 14 products / series in this family ↗
Communication and central monitoringCompare 8 products / series in this family ↗Contact your distributor in Türkiye for Bender products.
As Bender’s distributor in Türkiye, ADEO Teknik provides technical product information and quotation support for model and accessory selection, manufacturer documentation and product supply.
BENDER TECHNICAL RESOURCES
Explore manufacturer documentation.
OFFICIAL MANUFACTURER SOURCE · EN
↗ISOMETER® / ISOSCAN® product portfolio
Manufacturer document · English
OFFICIAL MANUFACTURER SOURCE · EN
↗Residual current monitoring product portfolio
Manufacturer document · English
OFFICIAL MANUFACTURER SOURCE · EN
↗Insulation-fault-location-MONITOR Ausgabe1-2016 en
Manufacturer document · English
Images and application content: official Bender sources. The relevant documents identify the exact model, variant and operating conditions.
EXPLORE THE SAME SECTOR
Other applications.
From application to product family
Explore product group introductions and original manufacturer brochures with ADEO Teknik, Bender’s distributor in Türkiye.
Insulation monitoring · IMDIn an IT system, live conductors are not directly connected to earth. Behaviour during the first insulation fault is assessed alongside the system configuration, leakage capacitances and protection arrangement.Read the product group guide ↗
Residual current monitoringDetecting sinusoidal AC, pulsating DC and smooth DC components requires different sensor and evaluator configurations. Choose A/F or B/B+ according to the application's current waveform.Read the product group guide ↗
Measuring and monitoring relaysVoltage and frequency, current and protective conductor loop monitoring are different tasks. Relay selection starts with the quantity to be monitored.Read the product group guide ↗
Communication and central monitoringInterfaces such as BMS, BCOM and Modbus are selected according to the product's supported architecture. Do not assume every device supports every protocol.Read the product group guide ↗