FEATURED SOLUTION
LINETRAXX® RCMS490-L
RCMS variant with LED indication and a separate alarm contact for each of its 12 measurement channels.
Industries / Ships and ports / Ports, cranes and marinas
Ships and ports · BENDER DISTRIBUTOR IN TÜRKİYE
Residual Current Monitoring in Ports and Marinas
BENDER APPLICATION INTRODUCTION · BRIEF SUMMARY
Monitor cable and connection conditions in shore supplies
Shore-to-ship supply cables and connections are exposed to weather and movement. Bender’s marine brochure considers insulation, residual current and connection monitoring for shore supplies alongside system voltage and earthing arrangement.
Bender distributor in Türkiye · ADEO Teknik
Sector brochure
Ships and marine systems
Understand the application’s electrical needs.
The supply arrangements of port equipment and marina berths create different measurement requirements. Circuit-level monitoring adds information on which section needs assessment alongside the general alarm.
Featured Bender products for this application
Start with models selected for the application’s measurement and monitoring duties; other products and accessories appear in the complete list below.
FEATURED SOLUTION
LINETRAXX® RCMS460-D
Residual current monitor with 12 channels and a local graphic display, supporting multi-device monitoring via BMS.
Compare all related products ↓ · Product selection and quotations from the distributor ↗
FROM THE BENDER BROCHURE · APPLICATION GUIDE
Monitor cable and connection conditions in shore supplies
Shore-to-ship supply cables and connections are exposed to weather and movement. Bender’s marine brochure considers insulation, residual current and connection monitoring for shore supplies alongside system voltage and earthing arrangement.
Related brochure section · PDF p. 20 ↗
Define the connection arrangement on the shore and ship sides.
Products for port distribution, marinas and crane circuits are selected according to earthing arrangement, transformer compatibility and environmental requirements.
Define monitoring duties according to cable, connection and distribution boundaries.
After choosing a product family for the application, compare the model’s measurement scope, accessory compatibility and communication options on its detail page.
Explore related Bender models ↓The explanation, Bender’s relevant sector publication and official application page form the basis of this content. The image is presented in its original form from the source brochure.
BENDER SECTOR PUBLICATIONS · ADEO TEKNİK
Bender sector brochures for this application.
BENDER SECTOR PUBLICATION
Ships and marine systems
Official Bender manufacturer publication
Open brochure PDF ↗Download PDF ↓Bender source document ↗Other related Bender publications · 4 documents
BENDER SECTOR PUBLICATIONUS / North American edition
Industrial applications · Bender solutions guide
Original publication: Bender Industry Applications
Bender manufacturer publication · US / North American edition
Open brochure PDF ↗Download PDF ↓Bender source document ↗
BENDER SECTOR PUBLICATION
Electrical safety for ships and offshore platforms
Original publication: Electrical safety for ships, mobile and fixed offshore platforms
Sector publication from Bender’s official download centre
Open brochure PDF ↗Download PDF ↓Bender source document ↗
BENDER SECTOR PUBLICATIONUS / North American edition
Marinas and shore power · US edition
Original publication: Marinas and Shore Power (US)
Bender manufacturer publication · US / North American edition
Open brochure PDF ↗Download PDF ↓Bender source document ↗
BENDER SECTOR PUBLICATION
Residual current monitoring in megayachts
Original publication: Megayacht - Residual current monitoring in the luxury segment
Sector publication from Bender’s official download centre
Open brochure PDF ↗Download PDF ↓Bender source document ↗BENDER SOLUTION GROUPS
From needs to product family.
Product families fulfil different measurement and notification duties. The model’s full scope and required components are identified in the relevant technical source.
BENDER PRODUCT FAMILYResidual current monitoring
Single- and multichannel RCM / RCMS monitoring products for earthed circuits.
Explore related products ↗
BENDER PRODUCT FAMILYInsulation monitoring · IMD
Application-specific ISOMETER® insulation monitoring devices for IT systems.
Explore related products ↗
BENDER PRODUCT FAMILYMeasuring current transformers
Measuring current transformer options compatible with RCM, RCMS and EDS products.
Explore related products ↗ADEO TEKNİK · BENDER DISTRIBUTOR IN TÜRKİYE
Let’s define the product
and its technical scope together.
You can request product information, manufacturer documentation and a supply quotation for this application.
Get product information for your application ↗- 01Application and systemApplication area, AC/DC configuration and nominal voltage.
- 02Product and technical documentationModel, variant, communication and compatible component information.
- 03Quotation and supplyDistributor support for product codes, quantities and accessory requests.
BENDER DISTRIBUTOR IN TÜRKİYE · PRODUCT SELECTION BY APPLICATION
Bender models for this application.
Products for port distribution, marinas and crane circuits are selected according to earthing arrangement, transformer compatibility and environmental requirements.
Residual current monitoring
LINETRAXX® RCMS490-L
RCMS variant with LED indication and a separate alarm contact for each of its 12 measurement channels.
Residual current monitoring
LINETRAXX® RCMS460-D
Residual current monitor with 12 channels and a local graphic display, supporting multi-device monitoring via BMS.
Measuring current transformers
LINETRAXX® CTUB100 series
AC/DC-sensitive measuring current transformer series comprising a CTBC core and electronic module.
Insulation monitoring · IMD
ISOMETER® iso685…
Insulation monitoring for inverter applications and large industrial installations.
Neutral grounding resistor monitoring · NGR
LINETRAXX® NGRM700
Monitoring NGR resistance, neutral current and voltage in high-resistance-grounded systems.
Measuring and monitoring relays
LINETRAXX® CMD420/CMD421
Relay series monitoring AC undercurrent and overcurrent conditions at three measurement inputs with standard current transformers.
Residual current monitoring
LINETRAXX® RCMS460-L
RCMS460 variant with channel alarm LEDs and BMS address indication for 12-channel systems.
Residual current monitoring
LINETRAXX® RCMS490-D
Monitoring device offering 12-channel residual current monitoring with the appropriate measuring current transformers.
OTHER OPTIONS IN THE PRODUCT FAMILY
Let’s select the variant for your needs.
Explore all options in the relevant family. Assess model selection alongside system topology, voltage, measurement requirements and accessory compatibility.
Residual current monitoringCompare 18 products / series in this family ↗
Measuring current transformersCompare 10 products / series in this family ↗Insulation monitoring · IMDCompare 30 products / series in this family ↗
Neutral grounding resistor monitoring · NGRCompare 10 products / series in this family ↗
Measuring and monitoring relaysCompare 14 products / series in this family ↗Contact your distributor in Türkiye for Bender products.
As Bender’s distributor in Türkiye, ADEO Teknik provides technical product information and quotation support for model and accessory selection, manufacturer documentation and product supply.
BENDER TECHNICAL RESOURCES
Explore manufacturer documentation.
OFFICIAL MANUFACTURER SOURCE · EN
↗ISOMETER® / ISOSCAN® product portfolio
Manufacturer document · English
OFFICIAL MANUFACTURER SOURCE · EN
↗Residual current monitoring product portfolio
Manufacturer document · English
OFFICIAL MANUFACTURER SOURCE · EN
↗Megayacht B en
Manufacturer document · English
Images and application content: official Bender sources. The relevant documents identify the exact model, variant and operating conditions.
EXPLORE THE SAME SECTOR
Other applications.
From application to product family
Explore product group introductions and original manufacturer brochures with ADEO Teknik, Bender’s distributor in Türkiye.
Residual current monitoringDetecting sinusoidal AC, pulsating DC and smooth DC components requires different sensor and evaluator configurations. Choose A/F or B/B+ according to the application's current waveform.Read the product group guide ↗
Insulation monitoring · IMDIn an IT system, live conductors are not directly connected to earth. Behaviour during the first insulation fault is assessed alongside the system configuration, leakage capacitances and protection arrangement.Read the product group guide ↗Measuring current transformersType A is considered for alternating and pulsating direct currents; suitable Type B sensors are assessed where smooth DC components must also be measured.Read the product group guide ↗Neutral grounding resistor monitoring · NGRNeutral grounding resistance and circuit topology determine the monitored quantities and device selection.Read the product group guide ↗
Measuring and monitoring relaysVoltage and frequency, current and protective conductor loop monitoring are different tasks. Relay selection starts with the quantity to be monitored.Read the product group guide ↗