FEATURED SOLUTION
ISOMETER® isoCHA425HV + AGH420-1/AGH421-1
IMD solution with coupling device for CCS or CHAdeMO DC fast charging stations.
Industries / E-mobility
BENDER DISTRIBUTOR IN TÜRKİYE · ADEO TEKNİK
IMD and Charging Control Products for E-Mobility
From charging infrastructure to vehicle systems.
BENDER SECTOR INTRODUCTION · BRIEF SUMMARY
E-mobility and charging infrastructure · Bender solutions.
Bender’s EV/EVSE brochure treats on-board high-voltage insulation, DC fast charging, AC charging control and residual current detection as separate functions. Component selection depends on whether measurement takes place in the vehicle or charging equipment and on the system architecture.
Bender distributor in Türkiye · ADEO Teknik
Sector brochure
Electrical safety in electric vehicles and charging infrastructure
ISOMETER® isoCHA for DC fast charging
Explore the isoCHA solution for insulation monitoring in DC fast charging. AC charging control is a separate function provided by a different product.
FEATURED SOLUTION
ICC1624
AC charge controller combining control electronics, supply and power switching on one board.
Compare all related products ↓ · Product selection and quotations from the distributor ↗
BENDER’S SECTOR APPROACH
Distinguish the electrical safety duties in the vehicle and charging infrastructure.
Bender’s EV/EVSE brochure treats on-board high-voltage insulation, DC fast charging, AC charging control and residual current detection as separate functions. Component selection depends on whether measurement takes place in the vehicle or charging equipment and on the system architecture.
On-board HV insulation
Insulation monitoring follows the condition of battery and traction circuits relative to the vehicle chassis.
Explore the brochure · PDF p. 6 ↗Charging control and DC charging
Charging controllers and DC charging insulation monitoring devices fulfil different duties. The brochure distinguishes these components through application examples.
Explore the brochure · PDF p. 4 ↗Residual current detection
In RDC-M-based Mode 3 AC charging solutions within the RDC-DD scope, DC residual current detection, a suitable switching element and an external Type A RCD are assessed together. The IMD monitors insulation resistance at the DC fast-charging output.
Explore the brochure · PDF p. 10 ↗FROM APPLICATION TO PRODUCT SELECTION
Assess measurements, diagnostics and status information together.
Define the circuit’s system arrangement, operating conditions and information needs, then explore the Bender product families and model details below.
Explore models for this sector ↓
BENDER SECTOR PUBLICATIONS · ADEO TEKNİK
Explore the sector through Bender publications.
BENDER SECTOR PUBLICATIONUS / North American edition
Electrical safety in electric vehicles and charging infrastructure
Original publication: Electrical Safety for EV/EVSE
Bender manufacturer publication · US / North American edition
Open brochure PDF ↗Download PDF ↓Bender source document ↗
ADEO PRESENTATION ARCHIVE
DC charging, vehicle insulation and charging control
Presentation file from the previous ADEO website · original link retained
Open brochure PDF ↗Download PDF ↓Other related Bender publications · 1 document
BENDER SECTOR PUBLICATIONUS / North American edition
Industrial applications · Bender solutions guide
Original publication: Bender Industry Applications
Bender manufacturer publication · US / North American edition
Open brochure PDF ↗Download PDF ↓Bender source document ↗As Bender’s distributor in Türkiye, ADEO Teknik provides product and accessory selection support, technical documentation and supply information for the solutions described in these sources.
APPLICATION → BENDER APPROACH
Which solution, where?
Identify the monitoring need and explore the relevant product family’s technical scope.
01 / APPLICATION
AC charging equipment
Meeting the charging system’s residual current detection requirements.
THE BENDER APPROACH
Application-specific benvac® and RDC/RCMB sensors or modules.
Related product family ↗VISIBILITY PROVIDED
Detection and test signals supported by the exact variant.
02 / APPLICATION
DC fast charging
Monitoring unearthed DC circuit insulation.
THE BENDER APPROACH
ISOMETER® IMD and coupling components for charging applications.
Related product family ↗VISIBILITY PROVIDED
Insulation condition and voltage measurements supported by the device.
03 / APPLICATION
Charging point management
Managing charging, metering and supervisory system communication.
VISIBILITY PROVIDED
Charging control, communication and load management depending on the variant.
Sector approach source: Official Bender sector information ↗. The exact model and variant are selected according to the application’s technical requirements.
RELATED PRODUCT GROUPS FOR THIS SECTOR
From needs to the right technology.
As Bender’s distributor in Türkiye, ADEO Teknik provides product selection, technical information and supply support.
BENDER PRODUCT FAMILYE-mobility residual current sensors
Application-specific sensors and modules for AC charging equipment manufacturers.
Explore the family ↗BENDER PRODUCT FAMILYE-mobility insulation monitoring
Different IMD products for DC charging infrastructure and vehicle HV systems.
Explore the family ↗
BENDER PRODUCT FAMILYAC charging control electronics
Devices and modules for charging control, communication and load management.
Explore the family ↗System topology, operating conditions and approval requirements are considered together when selecting products and variants.
BENDER DISTRIBUTOR IN TÜRKİYE
Access Bender technology
through ADEO Teknik.
E-mobility and charging infrastructure · explore product families, manufacturer technical information and supply options.
Get information and a quotation for your sector ↗- 01Product family and model informationProduct scope appropriate to the monitored quantity and system arrangement.
- 02Manufacturer technical sourcesData sheets, variant information and relevant operating manuals.
- 03Quotation and product supplyDistributor support for product codes, accessories, quantities and supply requests.
BENDER DISTRIBUTOR IN TÜRKİYE · PRODUCT SELECTION BY SECTOR
Bender models for your sector.
Compare related products with images and access technical details, model options and manufacturer documentation. Assess the technology required by your application alongside suitable accessories.
AC charging control and power electronics
Controller board and compatible power module options for charging equipment manufacturers.
AC charging control electronics
ICC1624
AC charge controller combining control electronics, supply and power switching on one board.
AC charging control electronics
ICC1314
Compact PCB controller integrated into AC charging stations with IPM power modules.
AC charging control electronics
ICC1324 Charge Controller
Charge controller managing charging equipment hardware and communication components.
AC charging control electronics
CC613 Charge Controller
Controller for control, communication and load management at electric vehicle charging points.
AC charging control electronics
IPM1300
Integrated module adding power, switching and monitoring components to a compatible ICC1314 controller.
AC charging control electronics
IPM1301 / IPM1401
Module group providing power relay, supply and monitoring functions in ICC1314-based Mode 3 systems.
Residual current detection and user interface
Assess together with sensors, the external protection arrangement and control software.
E-mobility residual current sensors
RDC104-4
DC residual current monitoring module (RDC-M) for integration into Mode 3 AC charging equipment under IEC 62955.
E-mobility residual current sensors
RCMB104
AC/DC-sensitive OEM module with an external measuring current transformer for Mode 2 AC charging equipment; IEC 62752/IC-CPD or UL 2231-2 coverage depends on the variant.
E-mobility residual current sensors
benvac® RCMB123
Fluxgate-based PCB sensor designed for portable AC charging equipment.
E-mobility residual current sensors
CTBC17 series
Magnetically shielded measuring current transformer for compatible charge controllers and residual current modules.
AC charging control electronics
HMI140 / HMI145 / HMI150
Module group providing RFID, status indication and additional interfaces to compatible Bender charge controllers.
AC charging control electronics
RFID105 / RFID114 / RFID117
RFID modules for card-based user authorisation with compatible Bender charge controllers.
DC charging and vehicle HV insulation
Distinguish insulation monitoring in a DC charging station from on-board vehicle monitoring.
E-mobility insulation monitoring
ISOMETER® isoCHA425HV + AGH420-1/AGH421-1
IMD solution with coupling device for CCS or CHAdeMO DC fast charging stations.
E-mobility insulation monitoring
ISOMETER® iso175
Insulation monitoring for unearthed high-voltage systems in road vehicles.
E-mobility insulation monitoring
ISOMETER® IR155-3203 / 3204
Compact insulation monitoring device for unearthed HV traction circuits in electric and hybrid vehicles.
E-mobility insulation monitoring
ISOMETER® IR155-4203 / 4204
Device series monitoring insulation to chassis on both the DC and AC motor sides of electric vehicle HV circuits.
OTHER OPTIONS IN THE PRODUCT FAMILY
Let’s select the variant for your needs.
Explore all options in the relevant family. Assess model selection alongside system topology, voltage, measurement requirements and accessory compatibility.
AC charging control electronicsCompare 10 products / series in this family ↗E-mobility residual current sensorsCompare 8 products / series in this family ↗E-mobility insulation monitoringCompare 4 products / series in this family ↗Contact your distributor in Türkiye for Bender products.
As Bender’s distributor in Türkiye, ADEO Teknik provides technical product information and quotation support for model and accessory selection, manufacturer documentation and product supply.
TECHNICAL SOURCES FROM THE MANUFACTURER
Brochures and technical documentation.
Links open Bender’s official PDF files in a new tab. The documents are in English.
GET INFORMATION FROM THE DISTRIBUTOR IN TÜRKİYE
What should you share for product selection?
Share the system type, AC/DC voltage, application and monitoring objective. We can assess your technical information, documentation and quotation request for the relevant Bender product family.
From application to product family
Explore product group introductions and original manufacturer brochures with ADEO Teknik, Bender’s distributor in Türkiye.
E-mobility residual current sensorsPortable charging cables and fixed wallboxes have different sensor and integration conditions.Read the product group guide ↗
E-mobility insulation monitoringAn on-board HV system and a DC charging station have different monitoring conditions. Identifying the device's target application is the first selection step.Read the product group guide ↗
AC charging control electronicsAC and DC charging architectures, connections and communication requirements determine the scope of the selected control solution.Read the product group guide ↗