FEATURED SOLUTION
ISOMETER® iso1685DP/isoHV1685D/isoLR1685DP
Three different ISOMETER models for general-purpose, high-voltage and low-insulation-resistance applications in large IT systems.
Industries / Mining and metallurgy / Smelting plants
Mining and metallurgy · BENDER DISTRIBUTOR IN TÜRKİYE
Insulation and NGR Monitoring in Smelting Plants
BENDER APPLICATION INTRODUCTION · BRIEF SUMMARY
Assess power conversion and system arrangement together in smelting plants
Power electronics and earthing arrangements determine measurement requirements in the power and control circuits of smelting plants. Bender’s industrial approach separates insulation monitoring in AC/DC IT systems from residual current monitoring in earthed distribution systems.
Bender distributor in Türkiye · ADEO Teknik
Sector brochure
Industrial applications · Bender solutions guide
Understand the application’s electrical needs.
Monitoring separate process circuits in smelting plants helps assess the source of electrical faults. Insulation monitoring and EDS can be considered in IT circuits, with suitable measurement products for the distribution system.
Featured Bender products for this application
Start with models selected for the application’s measurement and monitoring duties; other products and accessories appear in the complete list below.
FEATURED SOLUTION
ISOMETER® IRDH275BM-7 + AGH675S-7…
Insulation monitoring combination for medium-voltage IT systems with AGH675S-7 or AGH675S-7MV15 coupling device.
Compare all related products ↓ · Product selection and quotations from the distributor ↗
FROM THE BENDER BROCHURE · APPLICATION GUIDE
Assess power conversion and system arrangement together in smelting plants
Power electronics and earthing arrangements determine measurement requirements in the power and control circuits of smelting plants. Bender’s industrial approach separates insulation monitoring in AC/DC IT systems from residual current monitoring in earthed distribution systems.
Related brochure section · PDF p. 10 ↗
Define the voltage, frequency and earthing arrangement of the relevant power circuit.
The same model is not assumed suitable for medium voltage, low insulation levels and HRG topology.
Match high-voltage or low-insulation-resistance requirements to the appropriate model and coupling device.
After choosing a product family for the application, compare the model’s measurement scope, accessory compatibility and communication options on its detail page.
Explore related Bender models ↓The explanation, Bender’s relevant sector publication and official application page form the basis of this content. The image is presented in its original form from the source brochure.
BENDER SECTOR PUBLICATIONS · ADEO TEKNİK
Bender sector brochures for this application.
BENDER SECTOR PUBLICATION
Electrical safety in mining
Official Bender manufacturer publication
Open brochure PDF ↗Download PDF ↓Bender source document ↗Other related Bender publications · 5 documents
BENDER SECTOR PUBLICATIONUS / North American edition
Electrical protection selection guide
Original publication: Electrical Protection Selection Guide
Bender manufacturer publication · US / North American edition
Open brochure PDF ↗Download PDF ↓Bender source document ↗BENDER SECTOR PUBLICATIONUS / North American edition
Industrial applications · Bender solutions guide
Original publication: Bender Industry Applications
Bender manufacturer publication · US / North American edition
Open brochure PDF ↗Download PDF ↓Bender source document ↗
BENDER SECTOR PUBLICATION
Electrical safety in mines · application options
Original publication: Electrical Safety in Mines
Sector publication from Bender’s official download centre
Open brochure PDF ↗Download PDF ↓Bender source document ↗
BENDER SECTOR PUBLICATIONUS / North American edition
High- and low-resistance grounding · HRG/LRG
Original publication: High-Resistance and Low-Resistance Grounding Systems
Bender manufacturer publication · US / North American edition
Open brochure PDF ↗Download PDF ↓Bender source document ↗
BENDER SECTOR PUBLICATION
Earthing in electrical networks by region
Original publication: System Grounding in the Americas, Australia, South Africa and Other Regions
Sector publication from Bender’s official download centre
Open brochure PDF ↗Download PDF ↓Bender source document ↗BENDER SOLUTION GROUPS
From needs to product family.
Product families fulfil different measurement and notification duties. The model’s full scope and required components are identified in the relevant technical source.
BENDER PRODUCT FAMILYInsulation fault location
ISOSCAN® / EDS products for identifying faulty branches in IT circuits.
Explore related products ↗
BENDER PRODUCT FAMILYInsulation monitoring · IMD
Application-specific ISOMETER® insulation monitoring devices for IT systems.
Explore related products ↗
BENDER PRODUCT FAMILYPower quality and energy metering
Tracking electrical quantities, energy consumption and power quality indicators.
Explore related products ↗ADEO TEKNİK · BENDER DISTRIBUTOR IN TÜRKİYE
Let’s define the product
and its technical scope together.
You can request product information, manufacturer documentation and a supply quotation for this application.
Get product information for your application ↗- 01Application and systemApplication area, AC/DC configuration and nominal voltage.
- 02Product and technical documentationModel, variant, communication and compatible component information.
- 03Quotation and supplyDistributor support for product codes, quantities and accessory requests.
BENDER DISTRIBUTOR IN TÜRKİYE · PRODUCT SELECTION BY APPLICATION
Bender models for this application.
The same model is not assumed suitable for medium voltage, low insulation levels and HRG topology.
Insulation monitoring · IMD
ISOMETER® iso1685DP/isoHV1685D/isoLR1685DP
Three different ISOMETER models for general-purpose, high-voltage and low-insulation-resistance applications in large IT systems.
Insulation monitoring · IMD
ISOMETER® IRDH275BM-7 + AGH675S-7…
Insulation monitoring combination for medium-voltage IT systems with AGH675S-7 or AGH675S-7MV15 coupling device.
System components and accessories
AGH675S-7 / AGH675S-7MV15
Coupling devices for insulation monitoring in medium-voltage IT systems with IRDH275BM-7.
Neutral grounding resistor monitoring · NGR
LINETRAXX® NGRM700
Monitoring NGR resistance, neutral current and voltage in high-resistance-grounded systems.
Power quality and energy metering
LINETRAXX® PEM353
Voltage, current, power and energy measurement; THD and harmonic indicators up to the 31st order.
Communication and central monitoring
POWERSCOUT®
Monitoring software combining electrical distribution data, events and long-term trends in web-based dashboards.
Communication and central monitoring
COMTRAXX® CP907-I
Condition monitor with a display and an integrated gateway.
Insulation monitoring · IMD
ISOMETER® iso685…
Insulation monitoring for inverter applications and large industrial installations.
System components and accessories
AGH150…
Coupling component extending the nominal voltage range of compatible ISOMETER® devices.
System components and accessories
AGH204S-4
Coupling device extending the voltage range of compatible ISOMETER devices in three-phase IT systems.
System components and accessories
AGH520S
Coupling device for connecting compatible ISOMETER models to AC systems up to 7.2 kV.
System components and accessories
AGH676S-4
Component extending the voltage range to 12 kV in AC IT systems with compatible ISOMETER devices.
OTHER OPTIONS IN THE PRODUCT FAMILY
Let’s select the variant for your needs.
Explore all options in the relevant family. Assess model selection alongside system topology, voltage, measurement requirements and accessory compatibility.
Insulation monitoring · IMDCompare 30 products / series in this family ↗
System components and accessoriesCompare 21 products / series in this family ↗
Neutral grounding resistor monitoring · NGRCompare 10 products / series in this family ↗Power quality and energy meteringCompare 2 products / series in this family ↗
Communication and central monitoringCompare 8 products / series in this family ↗Contact your distributor in Türkiye for Bender products.
As Bender’s distributor in Türkiye, ADEO Teknik provides technical product information and quotation support for model and accessory selection, manufacturer documentation and product supply.
BENDER TECHNICAL RESOURCES
Explore manufacturer documentation.
OFFICIAL MANUFACTURER SOURCE · EN
↗ISOMETER® / ISOSCAN® product portfolio
Manufacturer document · English
OFFICIAL MANUFACTURER SOURCE · EN
↗Insulation-fault-location-MONITOR Ausgabe1-2016 en
Manufacturer document · English
OFFICIAL MANUFACTURER SOURCE · EN
↗Steuerstromkreise HSellner EN
Manufacturer document · English
Images and application content: official Bender sources. The relevant documents identify the exact model, variant and operating conditions.
EXPLORE THE SAME SECTOR
Other applications.
From application to product family
Explore product group introductions and original manufacturer brochures with ADEO Teknik, Bender’s distributor in Türkiye.
Insulation fault locationThe locating current injector, suitable measuring current transformers and EDS evaluator must be considered together.Read the product group guide ↗
Insulation monitoring · IMDIn an IT system, live conductors are not directly connected to earth. Behaviour during the first insulation fault is assessed alongside the system configuration, leakage capacitances and protection arrangement.Read the product group guide ↗
Power quality and energy meteringMain distribution, subdistribution and load levels are monitored according to the installation configuration. Multiple measuring points help assess the source of a change.Read the product group guide ↗
System components and accessoriesIsolating transformers, coupling units, power supplies and auxiliary components perform different tasks. Select accessories alongside the main device's documents.Read the product group guide ↗Neutral grounding resistor monitoring · NGRNeutral grounding resistance and circuit topology determine the monitored quantities and device selection.Read the product group guide ↗
Communication and central monitoringInterfaces such as BMS, BCOM and Modbus are selected according to the product's supported architecture. Do not assume every device supports every protocol.Read the product group guide ↗